Load Shedding and Home Security: How to Keep Your System Running

Load shedding is the single biggest threat to home security systems in South Africa. When the power goes out, your cameras stop recording, your alarm loses its siren, your electric fence drops, and your automated gate will not open. Criminals know this. Here is how to keep your security running through every stage of load shedding.

What Goes Down During Load Shedding

  • CCTV cameras and NVR — no power means no recording, no live view and no motion alerts
  • WiFi router — smart cameras, locks and doorbells lose connectivity
  • Alarm system — most panels have a backup battery (4-8 hours) but sirens and armed response communication may fail
  • Electric fence — the energiser stops and the fence becomes a passive barrier
  • Automated gate — the motor has a battery backup but it typically lasts only 10-20 open/close cycles
  • Intercom and video doorbell — most wired intercoms lose power completely

Solution 1: UPS for Critical Equipment

A UPS (Uninterruptible Power Supply) is the simplest and most affordable backup option. A 1000VA UPS (around R2 000 – R3 500) can keep your NVR, router and alarm panel running for 2-4 hours — enough for stage 2 and most stage 4 slots.

What to connect to your security UPS:

  • NVR or DVR (typically 15-30W)
  • WiFi router (10-15W)
  • PoE switch if your cameras use PoE (varies, budget 60-100W for 4-8 cameras)

Do not connect to the UPS: Electric fence energisers (they draw too much current and drain the battery fast), gate motors (high startup current can damage small UPS units) or any heating/cooling equipment.

Solution 2: Inverter or Solar

For extended outages or stage 6, an inverter trolley or a small solar system dedicated to security is worth considering. A 3kWh lithium battery with a 1kW inverter can run your entire security setup through the night. Dedicated security circuits that separate security loads from household loads make this practical and affordable.

Solution 3: Battery-Powered Devices

Battery-powered cameras like the Reolink Argus or Eufy SoloCam keep recording independently of your mains power. They are an excellent supplement to a wired system — place them at your most vulnerable points as a load shedding backup layer. Solar panels designed for these cameras can keep them charged indefinitely.

Quick Checklist

  • Get a UPS for your NVR, router and PoE switch — this is the minimum
  • Test your alarm panel backup battery — replace it every 2-3 years
  • Keep your gate motor battery maintained — test manual release regularly
  • Add at least one battery-powered camera as a backup
  • Consider a dedicated security circuit on your inverter or solar system
  • Keep a charged torch and your phone nearby — basic but essential

Load shedding is not going away soon. Building resilience into your security system is not optional — it is essential. Start with a UPS and expand from there based on your budget and load shedding stage.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top